Follow

Contact

Address

  • facebook
  • googlePlaces

(604) 513-1376

19862 96 Ave #3, Langley, BC V1M 3C1, Canada

(604) 513-1378

©2017 by Shail's Motorcycles Ltd.. Proudly created with Wix.com

Replacements for models with heated grips.

With these replacement grips, it's possible to restore your bike's appearance and comfort. Over time, the rubber wears out and the gripping qualities are reduced. Instead of replacing the entire expensive grip assembly, if you are careful, you will be able to simply replace the grip rubber and save a substantial amount of money.

Installation tips:

  • Remove bar end weights and or throttle lock
  • With a sharp razor blade, utility knife etc. very carefully cut along the length of the grips. Be careful not to cut too deeply or you may damage the heating element. Slice just a little at a time until you can tear the grip rubber apart.
  • Peel off the old grip rubbers
  • Remove as much of the remnants of grip rubber (if present) as you can to make the surface as smooth and clean as possible
  • Install the new grips **
  • Reinstall bar end weights and ensure that they are tight. Thread locking fluid is recommended on the bar end weight bolts and it may be necessary to re-adjust your throttle lock if you have one.


** When installing the grip rubbers, you will need to use something that will act as a lubricant for installation and an adhesive thereafter. Some ideas are a universal spray adhesive or rubber glue and some brands of hair spray have been known to work very well. Whatever agent is used, apply to the inside of the grip and the heating element, then quickly slide the grip on and twist and position it as needed immediately before the lubricant dries.

These grips are original equipment quality and a direct replacement for the original BMW part. Installation requires extreme caution to avoid damaging the heating elements. We cannot be held responsible if your heating elements are damaged during installation.

This version was introduced with the R1200 GS in 2004 and made its way onto pretty much all subsequent models. These grips can be installed on earlier models as well.

These grips have an inside diameter of 24mm and they are 125mm long with an open end.

 

This item fits the following:

  • C600 Sport
  • C650 GT
  • G650 GS (2011 - on)
  • G650 GS Sertao
  • F650 GS / G650 GS
  • F650 GS Dakar
  • F650 CS
  • F800 S
  • F800 ST
  • F650 GS (2-Cyl)
  • F700 GS
  • F800 R (2009 - 2014)
  • K1100 LT
  • K1100 RS
  • K1200 LT
  • K1200 RS
  • K1200 GT (2003 - 2005)
  • K1200 S
  • K1200 R
  • K1200 R Sport
  • K1200 GT (2006 -2008)
  • K1300 S
  • K1300 R
  • K1300 GT
  • R1100 RS
  • R1100 R / R850 R
  • R1100 GS
  • R1100 RT
  • R1100 S
  • R1150 GS
  • R1150 GS ADV
  • R1150 R
  • Rockster
  • R1150 RT
  • R1150 RS
  • R1200 GS (2004 - 2012)
  • R1200 GSA (2005 - 2013)
  • R1200 GS-LC (2013 - on)
  • R1200 R (2006 - 2014)
  • R1200 RT (2005 - 2013)
  • R1200 S
  • R1200 ST
  • HP2 Megamoto
  • HP2 Enduro
  • F800 GT
  • F800 GS Adventure
  • R1200 GSA-LC (2014 - on )
  • R1200 RT-LC (2014 - on)
  • F800 GS
  • F800 R (2015 - 

BMW Hand Grip Set

SKU: 7290612
C$58.95Price